Many are annoyed that their beloved Mustang didn't come with a proper spare wheel, and instead only an inflator kit that won't save you in all circumstances!
A solution to this problem has landed in Australia and at Mustang Motorsport, we're proud to supply it to you!

This Space Saver Kit will fit both the GT and EcoBoost, and has no issues clearing the Brembo Brakes. Additionally it has the same rolling diameter of your stock rims, so you can rest assured your Mustang won't be driving lop-sided.

At Mustang Motorsport, we also want to ensure you quality parts! So instead of buying a jack and lever from any old place, these have been sourced through Ford as a genuine part. You won't need to worry about jacks collapsing, or levers bending, being of OEM Ford quality!

Product Features:
- 19 "Alloy wheel and tyre assembly
- Tyre is 135/7OR19
- Gloss Black Colour
- Fits over Brembo Brakes
- Fits all GT & EcoBoost Models
- Fits in spare wheel well
- Fits under boot floor panel and doesn't raise floor panel
- Retains use of OEM wheel nuts
- Hub centric same as OEM wheel
- Wheel and Tyre come fully balanced
- Includes Felt Mat for between Wheel and Wheel Well to keep things clean
- 80 Kmp speed rating on approved tyre
- Rim meets JWL and TUV load ratings
- Should you require a replacement tyre, they are readily available Australia wide

Kit Contents:
- Rim with Tyre
- Genuine Ford Vehicle Jack
- Genuine Ford Tyre Lever

(MM-TTS-MUS19WT)

Click here to download installation guide.

Installation Information:
Tools Required: None
Time of Install: About 30 Minutes
Level of Difficulty: Easy

Fitting Instructions

First, put in the piece of carpet at the bottom of the well to stop any jiggling or noise. Unwind the jack as per picture, then place these into the wheel well with the Thread up against the point that the wheel hold down threads into in the wheel well. Then we usually place the paper packing that was around the jack and lever in the box over the top part of the jack to further reduce any jiggling or noise from the kit. We then place the wheel into the well, sitting on top of the jack and lever, fit the jack handle between the tyre and back of the wheel well, then take the screw down from the inflator kit, put this through the centre of the wheel, the hole in the lever, and through into the right-hand screw hole in the wheel well. Screw it down until the whole kit is firmly in place with little movement.

SKU MM-TTS-MUS19WT
Brand Mustang Motorsport
Unit Of Measure set

MUSTANG SPARE WHEEL KIT

By: on 28 March 2020
Just the job, looks good, stores nicely, mat a nice touch. Everything you need
(5)

Mustang spare wheel kit

By: on 18 October 2019
After a of research I have found this product to be the best value. The delivery was in one day interstate.
(5)

Mustang space saver wheel

By: on 6 May 2019
Arrived within 2 days, not 4 working days as predicted - excellent Fitting of wheel brace to jack is easy if you realise jack must be wound out before brace can lock in. I had to watch a utube video to realise how. Fits perfectly into wheel well and does not protrude into cargo area. Happy Chappy Love my 2018 Mustang
(5)

Spare Wheel Kit

By: on 20 April 2019
I am so happy that I could get a spare for my Mustang, feel a lot safer knowing I have a spare. Mustang Motor Sports delivered the package in three days that is fast. Thank you.
(5)

Mustang Motorsport 2015-19 Spare Wheel Kit

By: on 2 April 2019
great product
(5)

The Spare Wheel that Ford Forgot

By: on 12 March 2019
OK so Ford didn’t forget it, they left it out on purpose because they are just cheap. This kit fixes that problem very well, making out of town trips much more feasible with mobility guaranteed in the event of a damaged tyre. Stowing the kit is a little tricky at first. Some packing between the felt mat and the underside of the tyre will stop the wheel wobbling about creating rattles and clunks. The kit is a good product and about $100 cheaper than the same thing from my local Ford dealer. Good job MM.
(5)

Highly recommend

25 February 2019
Super quick interstate delivery and high quality product that I can rely on. AAA+++
(5)

Thank God for a Spare!

By: on 18 December 2018
I already picked up up a nail in my rear tyre (I have a new Mustang) and 'panicked' a touch as I was planning a long road trip. I had not noticed this nail but it was seen by my local mechanic who was doing my first oil change. Fortunately he was able to repair the tyre then and there.Can you imagine being stuck (say) on some lonely backroad , miles from nowhere and you had a flat tyre. Would the tyre repair kit cut the mustard? Maybe but maybe not. The rumour floating around is that they will get you out of an emergency. All well and good if you are in a big city close to a tyre retailer who can repair your tyre. It will be a different scenario if you are caught in no mans land. Hence the proper spare tyre. Ford should be ashamed of itself for not providing this based on my description above. Well done to Mustang Motorsport for having the insight to provide such a product. A good old fashioned spare that fits like a glove in the wheel wheel in the boot. Thank you!
(5)

Spare Wheel Kit Order #MM101240

By: on 23 November 2018
Hello there, Excellent product, very prompt delivery and a pleasure to deal with, will highly recommend Mustang Motorsport to any Mustang owner. Thank you very much Cheers Hans
(5)

Mustang Motorsport 2015-2019 Spare Wheel Kit

By: on 9 November 2018
Very happy with purchase and fitting in boot wheel well.
(5)

Spare wheel kit fitting

By: on 13 October 2018
Very happy with quality of the product and delivery was quick. Only issue is fitting of jack under spare wheel? There were no instructions and jack/tyre lever do not fit where they should go?
(4)

Mustang Motorsport Response
Hi Frank, we too can find it a little annoying to get the wheel in with the jack and lever, but it is indeed possible and will all go in without issue. First put in the piece of carpet at the bottom of the well to stop any jiggling or noise. Install the lever onto the jack following the little alignment hole and hook on each side, then place these into the wheel well with the hole in the lever centred over the right-hand bolt hole in the wheel well. Then we usually place the paper packing that was around the jack and lever in the box into the back of the wheel well to further reduce any jiggling or noise from the kit. We then place the wheel into the well, sitting on top of the jack and lever, take the screw down from the inflator kit, put this through the centre of the wheel, the hole in the lever, and through into the right-hand screw hole in the wheel well. Screw it down until the whole kit is firmly in place with little movement. You might find it's hard to start the thread with the paper packing at the back, so just move it around until you can get it started - just make sure you don't spoil the thread accidentally! If you need any further assistance with the wheel kit, let us know and we'll be happy to assist!

2015-19 low profile spare wheel kit

By: on 27 September 2018
The wheel and tyre are of very good in quality as you would expect. One thing I was very disappointed with, is the Jack and wheel brace can not be mounted in the spare wheel well with the spare wheel over the top of it, as with the non performance packs in the U.S. The wheel's offset doesn't allow for clearance over the Jack. Where do I now mount the jack and wheel brace?
(2)

Mustang Motorsport Response
Hi Alan, we too can find it a little annoying to get the wheel in with the jack and lever, but it is indeed possible and will all go in without issue. First put in the piece of carpet at the bottom of the well to stop any jiggling or noise. Install the lever onto the jack following the little alignment hole and hook on each side, then place these into the wheel well with the hole in the lever centred over the right-hand bolt hole in the wheel well. Then we usually place the paper packing that was around the jack and lever in the box into the back of the wheel well to further reduce any jiggling or noise from the kit. We then place the wheel into the well, sitting on top of the jack and lever, take the screw down from the inflator kit, put this through the centre of the wheel, the hole in the lever, and through into the right-hand screw hole in the wheel well. Screw it down until the whole kit is firmly in place with little movement. You might find it's hard to start the thread with the paper packing at the back, so just move it around until you can get it started - just make sure you don't spoil the thread accidentally! If you need any further assistance with the wheel kit, let us know and we'll be happy to assist!

Spare Wheel Kit

By: on 14 September 2018
Fantastic product but the only issue is that the wheel needed to be slightly wider to allow the jack to be fitted in the centre spot as shown. I will be placing 15- 20mm spaces on the bottom to raise the spare wheel and hopefully that will allow me to fit jack in its original spot.
(4)

Mustang Motorsport Response
Hi Mario! Glad you like the product! :) We also find it can sometimes be a little annoying to get the wheel in, and there is a small amount of space between the bottom of the wheel well and the wheel, which causes the wheel to jiggle a little. What we do, and what we'd recommend when installing these, is to place the paper packaging that came with the kit underneath the spare wheel at the back. We usually start the thread on the lock down, then wedge the paper in-between, then screw down the tie-down until it's firm. This way it ensures the stops jiggling, and also ensures the wheel well stays dry in case someone spills a bit of water in the back! ;) Just in case anyone else is reading this too, when screwing in the lock-down, don't screw it into the centre hole, screw it into the right-hand hole, otherwise it won't screw down properly! :) Regards, David!

Great Product

By: on 3 September 2018
Great service and product, fast delivery
(5)

Spare wheel kit

By: on 2 August 2018
Great guys to deal with !
(5)

Write a product review

Others Also Bought


More From This Category