Cervini's Mustang Ram Air Hood easily replaces the factory bonnet using simple hand tools. No Cutting. No Drilling. No Shaving. No Trimming. No Headache!
Cervini’s Ram Air Hood attaches to the factory hinges and latch with NO need for hood pins. The Ram Air Hood features an exclusive channel on the underside of the hood that conceals the washer nozzle hoses. The 2018-21 Mustang Ram Air Hood reuses the Ford washer nozzles and keeps them hidden, so the underside of the hood is clean and delivers the custom show quality appearance that Cervini’s is known for.

Cervini's 2018-21 Type IV Ram Air Hood is built out of air craft grade fibreglass materials and manufactured at their head quarters in Vineland New Jersey. The added clearance gives you plenty of space for a ton of under hoods items, like large displaced superchargers. As with all Cervini’s products, their unparalleled fit and finish is guaranteed.

Product Features:
- Ram Air Intake
- Heat Extractor Vents
- Draws Cold Air into the engine bay for improved performance and reduced under-hood temperatures
- Heat Extractor Vents draw more heat out than factory heat extractor vents
- Gives plenty of space for underhood kits
- Adds some aggressive Styling to your Mustang
- Built from Aircraft Grade Fibreglass
- Sensational fit and finish
- NO Hood Pins required
- Utilises factory hinges, latch, and even washer nozzles!
- Hood Strut Kit Compatible (we recommend the use either Cervini or Steeda - nothing else!)

NOTE: This product must be prepped and painted prior to installation. If you would like this bonnet painted to match your body colour, please contact us for a quote! Painting not available for customers requiring freight.

Hoods/Bonnets can only be delivered to a business address. If you require a delivery to a private address, please give us a call.


Installation Information:
Tools Required: Basic Tools
Time of Install: About 1 Hour
Level of Difficulty: Moderate

**Hood requires prepping and painting prior to fitting**
**Requires two persons to fit bonnet**

SKU Cervini-1237
Brand Cervini's Auto Designs
Unit Of Measure ea

Cervini's Auto Designs Inc. warrants, to the original purchaser that our products will be free from defects in materials and workmanship for a period of 90 days from the date of purchase on fiberglass parts and a lifetime warranty on all urethane parts. All warranty claims must be shipped back to Cervini's Auto Designs Inc. prepaid with proof of purchase and a description of the defect. It will be up to Cervini's Auto Designs Inc. to replace, credit or repair said defective part. Cervini's Auto Designs Inc. will not be held liable for anything other than replacement of said defective part and will not incur any other costs. This warranty becomes void if Cervini's Auto Designs Inc. products are mis-used, altered, abused or installed improperly. Cervini's Auto Designs Inc. will not be liable for injury or any damages arising directly or indirectly from any defects in its' goods, defective or otherwise. You have specific legal rights with this warranty and may also have special rights that vary from state to state.

2018-20 CERVINI TYPE IV Ram Air Hood

29 May 2021
Self Installed. Hood fitted perfect. I loosened guard bolts and re adjusted the gap which was easy. Bonnet latch on car had to be adjusted slightly but again easy. I didn't like the way Cervini attached the wiper washer line as it left the spray jet stem exposed under the hood. I decided to cut the stem and shorten it so it could fit in the hood channel completely hidden. The is a rubber seal the comes off the original hood (near the windscreen end) and is supposed to fit under the Cervini Hood. I found the holes in the Cervini hood were too small to accept the clips on the seal so I left it off. I don't know what purpose it serves anyway. Delivery form M/M was super quick ie 2 days from VIC to SA country. Hood now painted and on car and looks great..very pleased.

Write a product review

We Also Recommend

Others Also Bought

More From This Category