The all-new Shelby Venom Wheels are optional equipment on the Shelby GTE, and is now available for purchase retail! Manufactured by WELD Racing, exclusively for Shelby American, the wheel uses a flow-formed technology making it lighter and stronger to an equivalent wheel.
Flow form wheels are stronger, lighter, increase shock load resistance, and offer increased flex tolerances verses a cast manufactured wheel. The primary difference between a cast and flow-formed wheel is the thickness of the wheel barrel. The flow forming process increases the strength of the aluminum allowing the barrel to be produced much thinner and lighter than a conventional cast aluminum wheel.
The Venom Wheel comes in a variety of colours, so make your choice!
Wheel Set Contents:
- 2x 20x9.5" Front Wheels (11.1kg each)
- 2x 20x10.5" Rear Wheels (11.2kg each)
You will also require Tyres, Tyre Pressure Monitor Sensors, and Lug Nuts for a complete installation. Please contact us for a quote.
Recommended Tyres are 275/35ZR20 Fronts, and 305/30ZR20 Rears. We recommend utilising Michelin Pilot 4S Tyres.
(VENOMWHEEL-20)
Installation Information:
Tools Required: Workshop Tools
Time of Install: About 1 Hour
Level of Difficulty: Tech Recommended
**TPMS Calibration is Required Post Installation**
SKU | VENOMWHEEL-20 |
Brand | Shelby American |
Venom 20" Shelby Wheels
By: Jason on 26 December 2018They simply look awesome on my Mustang and fill out the guards perfectly for a really tough look
(5)
Quinny
By: Nathan Quinn on 28 September 2018Awesome. Thanks guys could not be happier...
(5)