Mix Lightweight Carbon Fibre, and multiple Heat Extractors, and you get TruFiber's A81-RL Bonnet; a fantastic look, a lightweight hood, a reduction in engine bay temperatures, and great a high quality carbon finish!
Heat Extractor Vents allows the hot air to escape out of the engine bay, ensuring underhood temperatures are reduced for better efficiency. This means that the Cold Air Intake draws in less hot air, and keeps the engine running at optimum temperature. With these you tend to get better performance when putting the foot down, and better fuel economy when cruising*
- Vacuum Infused Real Carbon Fibre
- 3K, 2×2 Twill Weave
- Raw Finish (NO Clear Coat)
- Hot Air Exits from Opening Heat Extractor Vents to keep Engine Cool
- Reinforced Metal Latch & Hinge Plates for Additional Safety
- Integrated Stainless Mesh Grille
- Pre-drilled Prop Hole
- Direct Bolt-on (bolts included)
- Approximate Weight: 17 Pounds
This product can be installed straight out of the box and does not require painting or clear coat. If you would like this bonnet painted to match your body colour, please contact us for a quote! Painting not available for customers requiring freight.
Note: You will require a Washer Relocation Kit for a complete installation.
Note: This bonnet requires clear coating for a carbon finish, or painting for a body colour finish. This bonnet cannot be fitted straight out of the box.
Please contact us for a quote on clear coating/painting. Painting not available for customers requiring freight.
*Results vary user to user, and will also depend on your air intake setup and your exhaust setup. Weather conditions will also cause varied results.
Tools Required: Basic Tools
Time of Install: About 1 Hour
Level of Difficulty: Moderate
**Requires two persons to fit bonnet**
**Product requires painting prior to fitment**
|Unit Of Measure||Each|
Be The First To Review This Product!
Help other Mustang Motorsport users shop smarter by writing reviews for products you have purchased.