Designed to be a replacement / service pad for those who've upgraded to the Wilwood, or Shelby by Wilwood, brake kit. These pads are designed for use as a Street Performance Pad, or Racing Pad with a compound of BP-10. They are the same pad that was originally included in your kit, and therefore make a fantastic replacement when it comes for a service.

This Brake Pad Kit can be utilised for both the Front 6-Piston and/or the Rear 4-Piston Callipers, making it an ideal item to take to the track, or leave on the shelf for when the time for servicing comes.

In the box comes a total of 4x Pads. Each Calliper on your Mustang requires 2x Pads, 1x for either side of the Calliper. If you require replacement pads for both the Front AND Rear Callipers, you will need to buy Qty 2x of this Brake Pad Kit.

Pad Features & Specs:
- BP-10 Compound
- Peak Temperature Rating: 800-900°F (427-482°C)
- Peak Friction Rating: 0.46
- Dust Production Rating: Low
- Pad Noise Rating: Low
- Thickness: 1.7cm
- Area: 28.2cm²
- Volume: 13.2³

Performance Characteristics:
- Medium friction, smooth engagement, low abrasion on iron rotors
- Flat torque curve
- Low to medium wear rate, increases as temperature increases

NOTE: These pads will NOT fit the Mustang's OEM Brembo Callipers. This is intended for Wilwood Brake Kits ONLY.

Warning for California: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

(150-9488K)

Installation Information:
Tools Required: Workshop Tools
Time of Install: About 1 Hour
Level of Difficulty: Moderate

**Professional Brake Bleed Required Post Installation**

SKU 150-9488K
Brand Wilwood
Unit Of Measure set

Be The First To Review This Product!

Help other Mustang Motorsport users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought


More From This Category