Steeda's ever so popular S550 Clutch spring assist is now available with a Heavy Duty Spring Perch assembly. Therefore eliminating the chances of you breaking the factory one upon installation or removal.
- 555-7022 - Steeda 2015-21 Clutch Spring Assist 35lb/in
- 555-7024 - Steeda 2015-21 Clutch Assist Spring Perch Upgrade
Your 2015-21 Mustang comes with a 185 lb/in clutch assist spring installed from the factory. This high-rate spring is what causes such a vague and disconnected clutch pedal feel. The clutch pedal travels in a circular arc, with the spring assist in the middle of that clutch pedal travel. The middle of that motion compresses the spring initially and then allows it to extend after the first 30 degrees of travel. The combination of a high-rate assist spring and motion of the pedal during engagement causes a non-linear and sometimes confusing pedal feel. Having a non-linear pedal feel makes it hard to modulate the clutch on your Mustang.
Many new Mustang owners have found that taking out the stock OE spring will give you somewhat similar results, but realistically the clutch becomes far too heavy especially if your Mustang is daily driven. Most owners fail to realise the prolonged effects of simply taking out your factory OE spring and not replacing it with another spring. By negating your factory clutch assist spring you will notice chatter/NVH from your clutch pedal. Your clutch pedal will never fully return to stock position without any assist spring, and over time your slave cylinder may begin leaking due to constant pressure on its seals from the clutch pedal not returning to the stock position. Avoid these problems in the future by installing the Steeda S550 Mustang Clutch Assist Spring 35 lb/in into your GT, Bullitt, Mach1,or EcoBoost!
The Steeda S550 Mustang Clutch Assist Spring 35 lb/in completely replaces the factory 185 lb/in assist spring. Steeda's engineers have honed in on just the right amount of spring rate to get you the perfect clutch pedal feel you look for in a Mustang. This assist spring is manufactured from piano wire that naturally has high tensile strength and high elastic qualities. Steeda's piano wire spring ensures a consistent spring rate and minimal sag even after repeated use. With the addition of our clutch assist spring, you will notice a much more linear feeling clutch - the reason being is that Steeda takes out much of the influence involved in your clutch pedal motion caused by the assist spring, allowing you to feel exactly what is happening with your clutch engagement.
You asked for it and Steeda delivered! After multiple requests for a heavy duty aftermarket solution for broken factory spring perches Steeda went to work and designed a piece much stronger. So much so they guarantee it for life!
This Kit comes with both the Steeda Perch Kit as well as the Steeda Clutch Spring Assist!
- Improve clutch pedal engagement feel
- Consistent spring rate and minimal sag even after repeated use
- More linear clutch feel
- Heavy Duty design that's guaranteed for life
- Avoid slave cylinder damage due to removal of stock clutch spring
- 100% Made in the USA, in house in Valdosta GA
Tools Required: Basic Tools
Time of Install: About 30 Minutes
Level of Difficulty: Easy